Tuesday, September 28, 2010

Tips To Getting The Best Sound Quality From Your Video Camera

By Grant Jacobson

Once you move from digital photography to videography as your method of recording moments either privately or as part of your occupation, you enter in in to a significantly larger world with larger troubles too. For instance, you now have to manage concerns of movement. The problems of illumination and surface noise are just as major of an issue other than now you have subjects which might be on the go and you've got to move with them.

But when using a cam corder to record the celebration under scrutiny, whether it's a wedding, a speech or presentation or some other significant occasion, the issue of getting the best quality sound offers distinctive problems. So its best to carry out some centered planning on the way you are going to allow for the audio needs of the event to your gear because should you have fantastic pictures but the words and sounds of the event are muddy or missing, then the quality of your final product is certainly harmed.

Many an unsatisfactory video has been taken with a camcorder because the operator depended too intensely on the tiny microphone that may be built into the casing of the unit. Really the only circumstance where this microphone might be ample would be if you were doing a private interview in a tiny room where you could place the video camera inside of three feet of the subject. Even then, surface noise in the encompassing building might end up part of the audio outside of the awareness of the operator at the time.

To make sure that you've complete understanding of what is going onto your video recording of each occasion, the investment in a good set of sealed back headsets to check the audio is an exceptional move. You are able to connect it into the video camera and you're dynamically aware of what's going onto that recording constantly. In the event that something enters the audio that is not appropriate, you can use editing techniques or even re-shoot the actual segment if that is possible in the framework of the affair.

For the majority of events, plan to make use of the auxiliary audio input plug to incorporate a mobile mic unit rather than rely on the on board microphone in the camcorder casing. This little plug alone opens a large selection of solutions to the issue of poor video camera audio tracks that is so often endemic of video clips made with this technology.

In case you are utilizing an external microphone, know about the constraints of the cable if you are not working with a radio frequency microphone unit. In a scenario like a speaker conducting a presentation, you can set the cable down between the recorder and the speaker's stand assuming you have sufficient cable length to reach to the spot that the mic will mount on the stand. Take care with all the excess cord, probably securing it with duct tape so individuals following the business presentation do not trip on the cable or pull it free which may bring about injury and damage the equipment.

In numerous circumstances for instance one where you intend to interview individuals in a roving fashion or to record a speaker who is on the go a whole lot, a radio frequency microphone could possibly be necessary. These can be more expensive but without the investment in this technology, your sound quality relying exclusively on the camcorder built in microphone will likely be disappointing. - 40725

About the Author:

No comments:

Post a Comment